Артикул | NF24G-MF-L |
Вспомогательные переключатели | Нет |
Кабель | 1 м, 4 x 0.75 мм |
Крутящий момент | 10 Нм |
Питание | 24 В~/= |
Площадь заслонки | 4 м |
Присоединение | Универсальный захват |
Серия | NF_G |
Управление | 10 Нм |
Electrical data | |
Nominal voltage | AC/DC 24 V |
Nominal voltage frequency | 50/60 Hz |
Nominal voltage range | AC 19.2...28.8 V / DC 21.6...28.8 V |
Power consumption in operation | 7 W |
Power consumption in rest position | 3.5 W |
Power consumption for wire sizing | 9.5 VA |
Connection supply / control | Cable 1 m, 4 x 0.75 mm |
Parallel operation | Yes (note the performance data) |
Functional data | |
Torque motor | Min. 10 Nm |
Torque spring return | Min. 10 Nm |
Positioning signal Y | DC 0...10 V |
Positioning signal Y note | Input impedance 100 k |
Control signal Y variable |
Open-close 3-point (AC only) Modulating (DC 0...32 V) |
Operating range Y | DC 2...10 V |
Operating range Y variable |
Start point DC 0.5...30 V End point DC 2.5...32 V |
Position feedback U | DC 2...10 V |
Position feedback U note | Max. 0.5 mA |
Position feedback U variable |
Start point DC 0.5...8 V End point DC 2.5...10 V |
Position accuracy | ±5%) |
Direction of motion motor | Selectable with switch 0 / 1) |
Direction of motion emergency control function | L (ccw)) |
Direction of motion note | Y = 0 V: At switch position 0 (ccw rotation) / 1 (cw rotation)) |
Direction of motion variable | Electronically reversible) |
Manual override | By means of hand crank and locking switch) |
Angle of rotation | Max. 95°) |
Angle of rotation note | adjustable starting at 33% in 2.5% steps (with mechanical end stop)) |
Running time motor | 150 s / 90°) |
Motor running time variable | 40...150 s) |
Running time emergency control position | ‹20 s / 90°) |
Adaption setting range | manual (automatic on first power-up)) |
Adaption setting range variable |
No action Adaption when switched on Adaption after pushing the gear disengagement button) |
Override control |
MAX (maximum position) = 100% MIN (minimum position) = 0% ZS (intermediate position, AC only) = 50%) |
Override control variable |
MAX = (MIN + 32%)...100% MIN = 0%...(MAX – 32%) ZS = MIN...MAX |
Sound power level motor | 40 dB(A) |
Spindle driver | Universal spindle clamp 12...26.7 mm |
Position indication | Mechanically, pluggable |
Service life | Min. 60,000 emergency positions |
Safety | |
Protection class IEC/EN | III Safety extra-low voltage |
Protection class UL | UL Class 2 Supply |
Degree of protection IEC/EN | IP66 |
Degree of protection NEMA/UL | NEMA 4, UL Enclosure Type 4 |
EMC | CE according to 2004/108/EC |
Certification IEC/EN | IEC/EN 60730-1 and IEC/EN 60730-2-14 |
Certification UL | cULus according to UL 60730-1A, UL 60730-2-14 and CAN/CSA E60730-1:02 |
Mode of operation | Type 1.AA |
Rated impulse voltage supply / control | 0.8 kV |
Control pollution degree | 4 |
Ambient temperature | -30...50°C |
Ambient temperature note | -40...50°C for actuator with integrated heating |
Non-operating temperature | -40...80°C |
Ambient humidity | 100% r.h. |
Maintenance | Maintenance-free |
Weight | |
Weight | 4.9 kg |