Электроприводы BELIMO / Приводы огнезадерживающих клапанов систем ОВиК Привод BELIMO BF24-SR-T

  • Привод BELIMO BF24-SR-T
Привод BELIMO BF24-SR-T

Заказать товар

Мы свяжемся с вами для уточнения формы оплаты и способа доставки заказа

Electrical data
Nominal voltage AC/DC 24 V
Nominal voltage frequency 50/60 Hz
Nominal voltage range AC 19.2 V ... 28.8 V / DC 21.6 V ... 28.8 V
Power consumption in operation 7 W
Power consumption at rest 2 W
Power consumption for wire sizing 9.5 VA
Power consumption for wire sizing note Imax 8.3 A @ 5 ms
Auxiliary switch 2 x SPDT
Switching capacity auxiliary switch Contact gold-plated silver: 1 mA … 3 (0.5) A, DC 5 V … AC 250 V (II Totally insulated)
Switching points auxiliary switch 5° / 80°
Connection supply / control Cable 1 m, 4 x 0.75 mm (halogen-free)
Connection auxiliary switch Cable 1 m, 6 x 0.75 mm (halogen-free)
Cable length thermoelectric tripping device 1 m
Functional data
Torque motor Min. 18 Nm
Torque spring-return Min. 12 Nm
Control signal Y DC 0 V ... 10 V
Control signal Y note Input impedance 100 k (0.1 mA)
Operating range Y DC 2 V ... 10 V
Operating range Y note For control signal Y
Position feedback U DC 2 V ... 10 V
Position feedback U note Max. 0.5 mA (for 0 … 100% angle of rotation)
Position accuracyn ±5%
Direction of rotation motor Can be selected by mounting L / R
Angle of rotation Max. 95°
Running time motor ‹120 s / 90°
Running time spring-return 16 s (tamb = 20°C)
Sound power level motor max. 45 dB (A)
Sound power level spring-return max. 63 dB (A)
Damper rotation Form fit 12 mm (10 mm with enclosed adapter)
Position indication Mechanically, with pointer
Service life Min. 60,000 safety positions
Safety
Response temperature thermal fuse Tf1: Duct outside temperature 72°C Tf2 and Tf3: Duct inside temperature 72°C
Protection class IEC/EN III Safety extra-low voltage
Degree of protection IEC/EN IP54 in all mounting positions
EMC CE according to 2014/30/EU
Low-voltage directive CE according to 2014/35/EU
Certification IEC/EN Certified according to IEC/EN 60730-1 and IEC/EN 60730-2-14
Mode of operation Type 1.AA.B
Rated impulse voltage supply / control 0.8 kV
Control pollution degree 3
Ambient temperature normal duty -30°C … 50°C
Ambient temperature safety duty T he safety position will be attained up tomax. 75°C
Non-operating temperature -40°C ... 50°C
Ambient humidity 95% r.h., non-condensing
Maintenance Maintenance-free
Weight
Weight approx. 2.8 kg

Mode of operation
The actuator is controlled with a standard signal of DC 0 ... 10 V and moves the damper to the operating position while tensioning the return spring at the same time. The damper is turned back to the safety position by spring energy when the supply voltage is interrupted.

Thermoelectric tripping device
If the ambient temperature of 72°C is exceeded, the thermal fuse Tf1 responds.
If the duct inside temperature of 72°C is exceeded, the exchangeable thermal fuse Tf2/Tf3 will respond.
When the thermal fuses Tf1, Tf2 or Tf3 respond, the supply voltage is interrupted permanently and irreversibly.
The LED is lit when
– there is a supply voltage,
– the temperature fuses are OK and
– the test switch is not pressed.
The function of the thermal fuse and the test button is only warranted if the actuator is connected to the power supply and has reached its operating position (LED on).

Signalling
Two microswitches with fixed settings are installed in the actuator for indicating the damper end positions.
The position of the damper blade can be read off on a mechanical position indicator.

Manual operation
Without power supply, the damper can be operated manually and fixed in any required position. It can be unlocked manually or automatically by applying the supply voltage. If manual operation is used when supply voltage is present, the actuator first moves to the safety position for checking and then to the position as defined by positioning signal Y. During this self-check, the motor running time is increased to 100 s and the measuring voltage remains at 2 V.